OpticPB® 693 Series is a UV-cut optically clear adhesive (OCA) designed for outdoor displays and E-paper applications, enabling full lamination of touch display modules. The product provides excellent UV blocking capability, effectively reducing ultraviolet penetration into the display module and minimizing degradation of optical components caused by prolonged sunlight exposure.
It maintains high optical transparency and stable performance, allowing visible light transmission while blocking harmful UV radiation to preserve display quality. Suitable for outdoor touch displays and E-paper devices (e.g., reMarkable), the series is available in 100 μm and 250 μm thicknesses to meet various design requirements.
UV-Cut OCA OpticPB® 693 Series, designed for full lamination of outdoor touch displays and bonding of outdoor optical components.
Outdoor Touch Display Full Lamination — OpticPB® 69310 (250 µm)
Outdoor Optical Component Bonding — OpticPB® 6934 (100 µm)
OpticPB® 69310 Basic Data (Suitable for applications such as outdoor touch screen, outdoor electronic paper, and UV exposure)
| Type |
Item |
Test methods / conditions | 0.25 mm(t) values | |
|---|---|---|---|---|
| Optical properties | Haze (%) |
Spectrophotometer (Glass / OCA / Glass ) |
Room Temperature | 0.1 |
| Total light transmittance (%) |
Spectrophotometer (Glass / OCA / Glass) |
Room Temperature | 90.15 | |
| ＠380nm light transmittance (%) |
Spectrophotometer (Glass / OCA / Glass) |
Room Temperature | 0.1 | |
| b* |
Spectrophotometer (Glass / OCA / Glass) |
Room Temperature | 1.4 | |
| Refractive index | JIS K 7142 | T = 23°C，λ = 589nm (Na, D line) | 1.47 | |
| Adhesion properties | 180° peel strength (N/25mm) |
peel strength：300 mm/min |
vs Glass | 30 |
| vs TAC | 10 | |||
OpticPB® 69310 Reliability test
| Type |
Item |
Test methods / conditions | Others | |
|---|---|---|---|---|
|
Optical reliability test |
High temperature test | 05°C | 1000 hrs | Passed |
| Low temperature test | -40°C | 1000 hrs | Passed | |
| High temperature and high humidity test | 85°C / 85% RH | 1000 hrs | Passed | |
| Thermal shock test | -40°C ⇔ 85°C | 1000 cycles | Passed | |
| QSUN test | DIN75220 | 600 hrs | Passed | |
| IEC60068-2-5 Sa3 | 1000 hrs | Passed | ||
Note:
Values are actual measurements, not guaranteed values.
Acceptance criteria: no whitening, yellowing, delamination, delayed bubbles, abnormal operation, display MURA, etc. after the test.
Width/Thickness/Length: 200 mm × 100 μm, 250 μm × 200 m/roll;
Custom die-cut sizes available.
建議您使用以下瀏覽器觀看本網站，
以獲得最佳瀏覽效果。
